Multiple Output Signal

• 
• 
• 

Product Description

► Can be used as a pressure relay, which can transmit up to four sets
► Can be used to display gas pressure, oil pressure, water pressure or liquid level
► Offers three functions used together or separately as needed: one- to four-stage alarms, 16-bit resolution analog transmission, and/or RS485 digital communication interface

✔ Responsive after-sales service / Customizable / High quality / One-year warranty

Illustration
Figure 1: Front view
Figure 2: Back view (with one or more than one output signals)

Product Specification

Accuracy	±0.1% F.S. ±1 digit (DC/Potentiometer/Resistor/PT-100/Load Cell) ±0.2% F.S. ±1 digit (AC)
Display screen	High brightness red LED 20.5 mm (0.8")
Sampling time	60 cycles/sec
Polarity indication	Automatic with " - " indication
Display range	-19999 ... 99999
Display over range indication	doFL/-doFL
Input over range indication	ioFL/-ioFL
Parameters indication	Push buttons
Back up memory	EEPROM
Relay contact	AC 250V/5A DC 30V/7A
Analog output resolution	16 bit
Output communication	Current output: ≦ 10V Voltage output: ≦ 20mA
Communication	RS485 Modbus RTU mode
Baud rate	19200/9600/4800/2400 bps
Tempering temperature	100 ppm/℃ (0℃ ... 60℃)
Ambient temperature& humidity	0℃ ... 60℃/20% ... 90% RH (non-condensing)
Power supply	AC/DC 100V ... 240V AC/DC 22V ... 50V
Power consumption	< 6.5VA

---

Related Products

High-Quality Pressure Transmitter

Digital Pressure transmitter Thermometer with Output Signal